|
 |
|
当前位置：首页->产品展示->宏基输送->HBM-D |
| 宏基输送配有双条精密模锻链条的斗式提升机
HBM-D型 |
|
| 输送能力超过每小时1000吨 |
|
 |
|
相临近的两个料斗间的间距较短，传动的速度 较快，使设备的输送能 力大大的加强，双链双斗最大
输送能力可超过1000吨/小时。(With a small bucket spacing, a high drive
speed is obtained and thus the equipment’s conveying capacity
is significantly increased. The max. conveying capacity of
double buckets with double chains can exceed 1000T/H. )
|
| 提升高度可超过60米（头尾轮中心距离） |
|
|
Conveying heights of more than
60m
|
| 采用国际上领先的双驱动结构技术 |
|
|
|
为了更好的、有效的提供较高的驱动力，同时又 可有效的降低每套单件驱动 的重量，能使设备左右较为
平衡的、对称的承重，并且能让驱动轴受到的扭力更加 均衡。(For providing powerful drive
better and effectively, and reducing the weight of single
drive per set, this dual-drive technology allows the left
and right Installation of dual-chain elevator on the site
sides of the equipment to bear balanced and symmetrical loads,
so that more uniform torsional forces are applied on the drive
shaft. )
|
| 尾部采用两完全独立张紧装置 |
|
|
|
尾部两完全独立张紧装置非常方便的补偿两条链条 的不同伸长长度，这是普通单斗双链（NE,NBH,NSE等）
望尘莫及的结构优势。(At the tail of the elevator, there are two completely
independent take-ups to easily compensate for different elongation
of the two chains, which is a construction advantage impossible
on ordinary elevators with single bucket and double chains
hNE, NBH and NSE type elevators,JIS). )
|
| 采拥有单条精密模锻链条的斗提机的一样的优越性能 |
|
|
|
|
耐高温,高寿命,运行平稳可靠,安装较为方便，链条及 料斗设计结构合理。 ( With
resistance to high temperature, long service life, steady
and reliable operation, this elevator is easy to install,
and its chains and buckets are designed to have reasonable
onstruction.
)
设计数据参考
型号说明：HBM-D-356-***
HBM 代表中央链提升机 , D代表双链双斗双驱动结构 , 356 代表大斗距 , *** 代表斗宽  详情请进入 |
|
|
